
Table of Content
- Inconel 625 Bar Specification
- Types of Inconel 625 Bar Stock
- Inconel 625 Round Bar HSN Code
- AMS 5837 Forged Bar Tolerance
- DIN 2.4856 Square Bar Size Chart
- Inconel 625 Rod Equivalent Material
- Weight Chart of Nickel 625 Hexagon Rod
- Inconel 625 Round Bar Price in India
- 2.4856 Inconel Black Bar Chemical Composition
- Inconel 625 Round Bar Weight Calculator Formula
- Physical Properties of Inconel 2.4856 Hexagonal Bar
- Inconel 625 Round Bar Material Properties
- AMS 5837 Rectangular Bar Surface Finish
- Inconel 625 Rod Tolerances of Precision
- Thermal Properties of UNS N06625 Rod
Alloy 625 Hex Bar Supplier in India, Refer Specification

Inconel 625 Round Bar Dimensions
Alloy 625 Bar Length
Inconel 625 Round Bar Thickness
Alloy Inconel 625 Hex Bar Density
AMS 5837 Forged Bar Melting Point
Inconel 625 Round Bar Temprature Range
Nickel 625 Hexagon Rod Testing
2.4856 Inconel Black Bar Tolerance
Nickel Alloy 625 Rounds Condition
DIN 2.4856 Square Bar Trade name
Nickel 625 Annealed Round Bar Benefits
WNR 2.4856 Rectangular Bar Delivery Condition
Inconel 2.4856 Hexagonal Bar Surface Finish
UNS N06625 Cold Drawn Bar Marking
Werkstoff NR. 2.4856 Rod Testing Requirements
WNR 2.4856 Bright Rounds Applications
Inconel 625 Rod
Alloy 625 Bright Bar
Alloy Inconel 625 Hex Bar
Inconel 6625 Flat Bar
DIN 2.4856 Square Bar
AMS 5837 Forged Bar
| Grade | HS Code |
|---|---|
| Inconel 625 Flat Bar | 75051220 |
| Type | Dia.(inch) | Dia. Tol. | ||
|---|---|---|---|---|
| Plus | Minus | |||
| Cold Drawn | 0.0625 – 0.1875 | Excluded | Inch | |
| – | .002 | |||
| 0.1875 – 0.5 | – | .003 | ||
| 0.5 – .9375 | Included | .001 | .002 | |
| Over .9375 to 1.9375 | .0015 | .003 | ||
| Over 1.9375 to 2.5 | .002 | .004 | ||
| Hot Worked | Up to 1 | .016 | .016 | |
| Over 1 to 2 | .031 | |||
| Over 2 to 4 | .047 | .031 | ||
| Over 4 | .125 | .063 | ||
UNS N06626 Hot Rolled Square Bar Size ranging from 5 mm – 500 mm Dia, View Sizes
| Dia. (Inch) | |
|---|---|
| 3 1/4 | 6 1/2 |
| 3 3/4 | 7 1/2 |
| 4 | 8 |
| 31/2 | 7 |
| 4 1/4 | 8 1/2 |
| 4 1/2 | 9 |
| 3 | 6 |
| 5 1/4 | 11 |
| 5 1/2 | 12 |
| 5 | 10 |
| 5 3/4 | 16 |
Testing Requirnments for Inconel 625 round bars?

Find Alloy 625 Forged Bar in Equivalent Material
| STANDARD | Inconel 625 |
|---|---|
| UNS | N06625 |
| WNR | 2.4856 |
| GOST | ХН75МБТЮ |
| BS | NA 21 |
| OR | ЭИ602 |
| EN | NiCr22Mo9Nb |
| JIS | NCF 625 |
| AFNOR | NC22DNB4M |
Stockist of WNR 2.4856 Bright Bar with various Dimensions, Refer Weight Chart
| Size | Kg / Mtr | Kg / Foot | Size | Kg / Mtr | Kg / Foot |
|---|---|---|---|---|---|
| 24mm | 3.543 | 1.080 | 4mm | 0.098 | 0.030 |
| 25mm | 3.871 | 1.180 | 4″ | 63.340 | 19.306 |
| 1-1/4″ | 6.349 | 1.924 | 6″ | 143.900 | 43.860 |
| 32mm | 6.314 | 1.894 | 6-1/2″ | 167.630 | 51.093 |
| 1-1/8″ | 5.033 | 1.534 | 1/4″ | 0.249 | 0.076 |
| 4-1/2″ | 80.340 | 24.4487 | 7mm | 0.298 | 0.091 |
| 7-1/2″ | 225.000 | 68.226 | 9mm | 0.498 | 0.152 |
| 4-3/4″ | 90.249 | 27.366 | 7/32″ | 0.190 | 0.058 |
| 35mm | 7.553 | 2.390 | 3/8″ | 0.557 | 0.170 |
| 27mm | 4.490 | 1.368 | 6mm | 0.223 | 0.068 |
| 22mm | 2.979 | 0.908 | 1/8″ | 0.062 | 0.019 |
| 7/8″ | 3.038 | 0.926 | 5/32″ | 0.095 | 0.029 |
| 1″ | 3.970 | 1.210 | 5mm | 0.154 | 0.047 |
| 20mm | 2.470 | 0.753 | 3mm | 0.055 | 0.017 |
| 36mm | 7.999 | 2.438 | 10mm | 0.620 | 0.189 |
| 38mm | 8.903 | 2.792 | 11mm | 0.748 | 0.228 |
| Size | USD Price | Price in Kuwait |
|---|---|---|
| 125 O.D. * 37mm thk | US $ 175.25 | KWD 53.77 |
| 125 O.D. * 26mm thk | US $ 119.91 | KWD 36.79 |
| 125 O.D. * 17mm thk | US $ 78.91 | KWD 24.21 |
| 30 * 1000mm Long | US $ 349.63 | KWD 107.28 |
Check Chemical Composition and Properties of Nickel Alloy 625 Cold Drawn Bar
| Weight Formula | |
|---|---|
| Inconel 625 Flat bar | Width (mm) * .00798 * Thickness (mm) = Wt./Mtr. |
- Hot finished
- Centreless ground
- Peeled and reeled
- Rough turned/peeled
- Peeled and turned
- Slit rolled edge
- Polished
- Bright drawn
- Smooth turned
- Cold drawn
- Hot rolled annealed and pickled
- Cold finished
| Size | Overall Variation Permitted | ||
|---|---|---|---|
| Class A | Class C | Class B | |
| mm | |||
| ≧ 6 <75 | 0.05 | 0.013 | 0.025 |
| Temperature | Meal Linear Expansion | Thermal Conductivity | Electrical Resistivity |
|---|---|---|---|
| °C | 10-6in/in•°F | Btu•in/ft2-h•°F | ohm-circ mil/ft |
| 316 | 13.3 | 14.1 | 135 |
| 427 | 13.7 | 15.7 | 136 |
| 1800 | – | 175 | 812 |
| 21 | – | 9.8 | 129 |
| 38 | – | 10.1 | 130 |
| 1400 | 8.5 | 144 | 824 |
| 1600 | 8.8 | 158 | 818 |
| 93 | 12.8 | 10.8 | 132 |
| 204 | 13.1 | 12.5 | 134 |
| 70 | – | 68 | 776 |
| 100 | – | 70 | 780 |
| 2000 | – | – | 806 |
Difference Between Inconel 625 and Inconel 718 Round Bar?
| Feature | Inconel 625 | Inconel 718 |
|---|---|---|
| Composition | 58% Nickel, 20% Chromium, 9% Molybdenum | 50% Nickel, 19% Chromium, 3% Iron, 5% Molybdenum |
| Max Service Temperature | Up to 1800°F (982°C) | Up to 1300°F (704°C) |
| Corrosion Resistance | Excellent (pitting, crevice, and oxidation) | Good (particularly against stress corrosion) |
| Tensile Strength | 110-130 ksi (758-896 MPa) | 130-160 ksi (896-1103 MPa) |
| Yield Strength | 70-90 ksi (483-620 MPa) | 100-130 ksi (690-896 MPa) |
| Ductility | 30% | 25% |
| Hardness | 90 HRB | 40-44 HRC (typically) |
| Applications | Aerospace, chemical processing, marine | Aerospace, oil and gas, nuclear |
| Heat Treatment | Not typically heat-treated | Heat treatable (typically 1300°F for 1 hour) |
| Standard Specifications | ASTM B443, AMS 5599 | ASTM B637, AMS 5662 |
What are the considerations for machining Inconel 625 Rod?
| Consideration | Details |
|---|---|
| Tool Selection | HSS, carbide, coated |
| Cutting Parameters | Low speeds, high feeds |
| Coolant Use | Flood, mist |
| Chip Removal | Effective design |
| Tool Geometry | Sharp edges, positive rake |
| Workpiece Holding | Secure |
| Machining Techniques | Dry machining, high-pressure |
| Monitoring and Adjustment | Continuous monitoring |
| Post-Machining Treatments | Stress relief |
| Safety Precautions | Protocols |
Which industries commonly use Inconel 625 round bars?

UNS N06625 Rod Location and Delivery Time
| Export to | Price changes and the expected delivery |
|---|---|
| Saudi Arabia | 5 % extra | 45 days |
| Brazil | 5 % extra | 30 days |
| Egypt | 5 % extra | 45 to 60 days |
| South Africa | 5 % extra | 45 to 60 days |
| Indonesia | 5 % extra | 45 to 60 days |
| Australia | 5 % extra | 45 to 60 days |
| UAE/ Dubai | 5 % extra | 45 to 60 days |
| Japan | 5 % extra | 45 to 60 days |
0 Likes